The Armour joint is designed such that, once cast, the two slab panels on either side of the joint begin to shrink independently. One panel includes the dowel sleeve and one of the top strips. The other top strip, the divider plate, and the dowel are included in the other part of the slab. The dowel bridges the joint and is embedded in both slab panels. Formwork for casting a concrete slab is achieved by the vertical divider plates, which support the top strip edge protection and load transfer plate dowels. Slab arris protection is provided by way of cold-drawn steel top strips with shear studs that anchor the top strips in the concrete. Load transfer across the joint is achieved by asymmetrically installed plate dowels and sleeves. The plate dowels are attached to the vertical divider plate and the sleeves are held in place under friction. The sleeves allow movements the joint expands and contracts. Prefabricated corner, 3-way, and 4-way intersections are available. We have dealers across Mumbai, Pune, Kolhapur, Solapur Delhi, Bangalore, Hyderabad, Kolkata, Raipur, Kota, Udaipur, Rourkela, Patna, Indore, Vijayawada, Vizag, Chennai, Kolkata, Surat, Vadodara, Ahmedabad, Rajkot, Mysore, Hubli, Mangalore, Gadag Chittoor, etc.