Solder Paste Inspection (SPI), commonly refers to SPI machine, as well as this process in PCB assembly led pcb assembly. To many buyers, one of the reasons that allow them to work with a PCB assembly house is the factory has equipped with solder paste inspection machine.
The first truth is almost 75% of defects in SMT process are caused by improper printing of solder paste. SMT defects usually means extra plenty of time and money will be spent in rework and remanufacture turnkey assembly. SPI machine is set before solder paste printing and placement to correctly screen out the poor solder printing, and then trace back to why the solder paste printing has occurred, to avoid 75% of the SMT defects. In particular, there are more and more parts below 0201 or bottom soldered parts such as BGA, which are very sensitive to the quality of solder paste printing. If the boards with problems can be detected before reflow, It is more effective and cost-effective than detecting after reflow soldering is completed, because the repairing after reflow might also damage the boards pcb assembly china. Solder paste inspection is actually similar to the AOI (Auto Optical Inspection) identification system, which check the boards quality through optical images. So the workflow of SPI machine and AOI machine is almost same: It is necessary to take one of the panel first to make a visual inspection, if it get through, then let the machine take its photo as a standard sample. Obviously, there will be many false positives, therefore, the parameters must be continuously modified until the false negatives rate is reduced to a certain level. Thus, a new solder paste inspection machine cannot be directly put into use, before which, engineering programming is required. In addition, most SPI machine can read Gerber file and CAD, but usually with some errors, continued adjustments are required.
* Printing volume of solder paste
* Solder paste printing height
* Area/volume of solder paste printing
* Flatness of solder paste printing
* Make SPC statistics to test process capability
* Whether the solder paste printing is shifted
* Whether the solder paste printing is highly deviated (tipped)
* Solder paste printing bridges
* Whether the solder paste printing is defective
SPI machine contributes so much to SMT quality, but which is not enough. Without experienced operators and quality control, the solder paste inspection is not able to achieve the expected effects. Fortunately, we've got a highly experienced QC and operation team, that's why PS Electronics can always offer high quality boards.
The electronics manufacturing companies have been hit by COVID-19 (Wuhan Coronavirus) outbreak, which is expected to have a negative impact on the global economy. As the main basic electronics components origin, many major electronics manufacturing companies have facilities in China, including Wuhan, the epicentre of the novel Coronavirus. Downstream which, lots of China native factories produce printed circuit boards and PCB assembly for the global electronics markets. The COVID-19 outbreak got China basic electronics components supply chain stuck. Currently there is still a quarantine in place for much people across China, which left them away from the production lines, the manufacturing capacities recover slowly. The good news is that COVID-19 has been contained in China, the electronics components supply is expected to recover quickly, but the bad one is there seems to be a outbreak in other regions except China, inclduing another electronics components manufacturing power - South Korea.